How fast, you ask?  Here is how easy it is:

(1) - Type in the tube number and press ENTER
(2) - Insert the tube
(3) - Press the letter "T"

You are testing!  At this point it is just like you inserted a test card.  But consider this:

Finally you have just one tester that will test them all, and there is not one single switch to throw or dial to set!  How much better can it get?

Actually, it gets a lot better.  On this page we are concentrating on how fast we can test.  But what about accuracy?  What about curve tracing?

If you are interested in those qualities too, you better take the tour!